• Home

Computer Networking

  • Networking
  • Tips&Trick
  • TUTORIAL
  • DISCLAIMER
  • PRIVACY POLICY
Home » networking » tutorials » HOW TO SETTING IP ADDRESS

HOW TO SETTING IP ADDRESS

Posted by heriyansyahp on Thursday, January 29, 2015


HOW TO SETTING IP ADDRESS

before you continue to read this article helps you to read the previous article in here HOW TO CONFIGURE IP ADDRESS

The article that you can read in advance,
because without reading the article, you will not be able to continue reading this article.
but if you've read the article then, this is the right article for you to read,

next to my article :D

How to Setting IP addess is as follows:

1. Click Start - Settings - Control Panel to exit the Control Panel dialog box (as shown
drawn below)


2. Double Click Icon Network Connection
3. Double-click Local Area Connection Icon To Exit Local Area Connection dialog box
status


4. double-click Internet Protocol (TCP / IP) in the Local Area Connection dialog box
Properties to exit the dialog box New: Internet Protocol (TCP / IP) Protocol


5. Click Use the following IP Address, enter the IP address data. IP Address computer 1
is 192.168.1.1 computer 2: 192.168.1.2 etc, with a subnet mask of 255.255.255.0. whereas
for gateway emptied it, because the LAN network is not connected to the LAN network
Other / internet.


6. Once the data of the TCP / IP is entered, click OK to close the dialog box Internet
Connection (TCP / IP) Properties.

7. click OK to close the dialog box "Local Area Connection Properties
8. Click Start - Run - to exit the dialog box RUN, and type CMD to exit the box
The new dialog "command"

9. In the dialog box "Command" earlier, type: ipconfig. If the Ethernet from the computer yet
connected to the LAN, it will come out the result as shown below


10. Do a ping test with a computer connection side (computer with ip address 192.168.1.2,
192.168.1.3, etc.), by typing in the command prompt:

C:\Documents and Settings\blogger>ping 192.168.1.2
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.2: bytes=32 time=3ms TTL=64
Reply from 192.168.1.2: bytes=32 time=3ms TTL=64
Reply from 192.168.1.2: bytes=32 time=2ms TTL=64
Reply from 192.168.1.2: bytes=32 time=2ms TTL=64

ok
finally finished already made an article about HOW TO SETTING IP ADDRESS
Another time I will make other important articles on computer networks

Thanks For Reading
Computer Networking World :D

Terimakasih anda telah membaca artikel tentang HOW TO SETTING IP ADDRESS. Jika ingin menduplikasi artikel ini diharapkan anda untuk mencantumkan link https://computernetworkingworld.blogspot.com/2015/01/how-to-setting-ip-address.html. Terimakasih atas perhatiannya.

Share to

Facebook Google+ Digg
at 10:43 PM
Labels: networking, tutorials

Newer Post Older Post Home

Entri Populer

  • Popular
    COMPUTER NETWORKING OVERVIEW
    Computer networking or data communication is really a key to the data technology. Today watch on the planet requires a computer networ...
  • Popular
    HOW TO CONFIGURE IP ADDRESS
    HOW TO CONFIGURE IP ADDRESS hii. I've previously posted about the Create Computer Networking Using Windows XP next. I will make...
  • Popular
    HOW TO SETTING IP ADDRESS
    HOW TO SETTING IP ADDRESS before you continue to read this article helps you to read the previous article in here HOW TO CONFIGURE IP...
  • Popular
    CREATE COMPUTER NETWORKING USING WINDOWS XP
    CREATE COMPUTER NETWORKING USING WINDOWS XP hello Networkers :D Computer networks are connecting two or more computers, so that betw...

Pages

  • Home
  • SITEMAP
  • Privacy Policy
  • DISCLAIMER

Total Pageviews

Label

  • networking
  • tutorials
©2014 by Computer Networking - powered by Blogger
Back to top