HOW TO CONFIGURE IP ADDRESS
hii.
I've previously posted about the
Create Computer Networking Using Windows XP
next.
I will make an article about HOW TO CONFIGURE IP ADDRESS
Once the network is physically installed, then you must configure the IP Address respective
computer so that it can communicate / connect. IP Address is addressing computer network
which consists of 32-bit binary. To create a LAN network you can use the IP Address one class
below this:
Class A: 10.x.x.x with a subnet mask of 255.0.0.0
Class B: 172.16.XX - 172.31.xx with subnet mask 255.255.0.0
Class C: 192.168.xx subnet mask of 255.255.255.0
CONFIGURE IP ADDRESS
In a LAN network, all computers must use the same class. In practice this time we
use Class C. Because the number of computers that are connected slightly, which is capable of class C
connect a maximum of 254 computers. So we use IP :
192.168.x.x with subnet 255.255.255.0
255.255.255.0 means 24 bits in the IP Address is the network address while the next 8 bits is
host ID (remember 255 if made into Binner there are 8 bits is 11111111). The value of x in the above can be filled up with a range of 1 -
254. Thus:
192.168.x - is the network address, while - HOST ID
So the LAN IP Address Range us later = 192.168.1.1 - 192.168.1.254 255.255.255.0 Subnetmask (if
confused with the description above, always use the IP address range is just if you want to build a LAN, do not
dizzy thinking about the theory above)
heheheuu
that is all from me,
I will make the next post on how to set ip address
Thanks For Reading My Article
:)
Terimakasih anda telah membaca artikel tentang HOW TO CONFIGURE IP ADDRESS. Jika ingin menduplikasi artikel ini diharapkan anda untuk mencantumkan link https://computernetworkingworld.blogspot.com/2015/01/how-to-configure-ip-address.html. Terimakasih atas perhatiannya.